Rhino-mounts SE4 Manuel d'utilisateur

©2005 Alamo Group Inc.SE4Published 01/05 Effective Serial No. SE04-15887 through Current Part NO. 00760866COPERATOR’S MANUAL RHINO® 1020 S. Sang

SAFETYSE4 05/05 Safety Section 1-4© 2005 Alamo Group Inc.SAFETYPROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE PERMANENTHEARING LOSS! Tractors with or wi

OPERATIONSE4 05/05 Operation Section 4-20© 2005 Alamo Group Inc.OPERATIONTransport only at safe speeds. Serious accidents and injuries can result f

OPERATIONSE4 05/05 Operation Section 4-21© 2005 Alamo Group Inc.OPERATION9.2 Brake and Differential Lock SettingMake sure the tractor brakes are in g

OPERATIONSE4 05/05 Operation Section 4-22© 2005 Alamo Group Inc.OPERATION9.4 Driving the Tractor and MowerStart off driving at a slow speed and gradu

OPERATIONSE4 05/05 Operation Section 4-23© 2005 Alamo Group Inc.OPERATION9.5 Crossing Ditches and Steep InclinesWhen crossing ditches with steep bank

OPERATIONSE4 05/05 Operation Section 4-24© 2005 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at an angle a

OPERATIONSE4 05/05 Operation Section 4-25© 2005 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can become entang

OPERATIONSE4 05/05 Operation Section 4-26© 2005 Alamo Group Inc.OPERATIONRotary Mowers are capable under adverse conditions of throwing objects forgr

OPERATIONSE4 05/05 Operation Section 4-27© 2005 Alamo Group Inc.OPERATION10.4 PTO RPM and Ground SpeedGround speed for mowing will depend upon the he

OPERATIONSE4 05/05 Operation Section 4-28© 2005 Alamo Group Inc.OPERATIONMow only in conditions where you have clear visibility in daylight or with a

OPERATIONSE4 05/05 Operation Section 4-29© 2005 Alamo Group Inc.OPERATIONDo not let the Blades turn when the Mower Deck is raised for any reason,incl

SAFETYSE4 05/05 Safety Section 1-5© 2005 Alamo Group Inc.SAFETYEquipment Operation Safety Instructions and PracticesUse extreme caution when getting

OPERATIONSE4 05/05 Operation Section 4-30© 2005 Alamo Group Inc.OPERATION10.6 Shutting Down the ImplementTo shut down the implement, first bring the

OPERATIONSE4 05/05 Operation Section 4-31© 2005 Alamo Group Inc.OPERATIONNever stand or allow another person to stand between a running Tractor and

OPERATIONSE4 05/05 Operation Section 4-32© 2005 Alamo Group Inc.OPERATION12. MOWER STORAGEProperly preparing and storing the mower at the end of the

OPERATIONSE4 05/05 Operation Section 4-33© 2005 Alamo Group Inc.OPERATIONBefore transporting the tractor and mower, idle thetractor engine, disengage

OPERATIONSE4 05/05 Operation Section 4-34© 2005 Alamo Group Inc.OPERATIONMake certain that the “Slow Moving Vehicle” (SMV) sign is installed in such

OPERATIONSE4 05/05 Operation Section 4-35© 2005 Alamo Group Inc.OPERATIONReduce speed before turning or applying thebrakes. Ensure that both brake p

OPERATIONSE4 05/05 Operation Section 4-36© 2005 Alamo Group Inc.OPERATIONArrange the chains so that when tightened, thechains are pulling downward an

OPERATIONSE4 05/05 Operation Section 4-37© 2005 Alamo Group Inc.OPERATION14. TROUBLESHOOTING GUIDEProblem Possible Cause RemedyNot Cutting Clean Blad

OPERATIONSE4 05/05 Operation Section 4-38© 2005 Alamo Group Inc.OPERATIONGearbox Overheating Low on lubricant Fill to level plugImproper type lubrica

Maintenance Section 5-1© 2005 Alamo Group Inc.MAINTENANCE SECTION

SAFETYSE4 05/05 Safety Section 1-6© 2005 Alamo Group Inc.SAFETYUse extreme care when lowering or unfolding the implement’s wings. Make sure no byst

MAINTENANCESE4 05/05 Maintenance Section 5-2© 2005 Alamo Group Inc.MAINTENANCEBefore operating your Rotary Cutter, make sure it is properly lubricate

MAINTENANCESE4 05/05 Maintenance Section 5-3© 2005 Alamo Group Inc.MAINTENANCEGearbox LubricationThe gearbox should be full (18 ounces).54 litersand

MAINTENANCESE4 05/05 Maintenance Section 5-4© 2005 Alamo Group Inc.MAINTENANCEDriveline LubricationGrease Fittings are located on the Cross Assemblyo

MAINTENANCESE4 05/05 Maintenance Section 5-5© 2005 Alamo Group Inc.MAINTENANCESHEAR PIN YOKE LUBRICATIONYoke is supplied with a grease fitting to lub

MAINTENANCESE4 05/05 Maintenance Section 5-6© 2005 Alamo Group Inc.MAINTENANCEBLADE REMOVALTo remove blades for sharpening or replacement. Remove lo

MAINTENANCESE4 05/05 Maintenance Section 5-7© 2005 Alamo Group Inc.MAINTENANCESTORAGEYour rotary cutter represents an investment from which you shoul

MAINTENANCESE4 05/05 Maintenance Section 5-8© 2005 Alamo Group Inc.MAINTENANCEGEARBOX SERVICE INSTRUCTIONS GEARBOX DISASSEMBLY (Mnt-R-0040)1. Remove

MAINTENANCESE4 05/05 Maintenance Section 5-9© 2005 Alamo Group Inc.MAINTENANCEInput ShaftDissassembly and Assembly1.Remove snap ring (Ref. #11) and t

MAINTENANCESE4 05/05 Maintenance Section 5-10© 2005 Alamo Group Inc.MAINTENANCEDISASSEMBLY OUTPUT SHAFT (FIG Mnt-R-0042)1.Install slotted nut (Ref 18

MAINTENANCESE4 05/05 Maintenance Section 5-11© 2005 Alamo Group Inc.MAINTENANCEMAIN GEARBOX1.Remove bearing (Ref. #8 Figure 8) from inside main hous

SAFETYSE4 05/05 Safety Section 1-7© 2005 Alamo Group Inc.SAFETYNever allow children to operate, ride on, or come close to the Tractor orImplement. U

SERVIS-RHINO LIMITED WARRANTY1. LIMITED WARRANTIES1.01. Servis-Rhino warrants for one year from the purchase date to the original non-commercial, g

TO THE OWNER/OPERATOR/DEALERIn addition to the standard Limited Warranty shown on the facing page, Servis-Rhino also provides:1.) ONE-YEAR (12 months)

SE4-OSM-05/05 P/N 00760866CPrinted U.S.ASE4ROTARY MOWER

SERVIS-RHINO®1020 S. Sangamon Ave.Gibson City, IL 60936-9907Please fold (do not tear), tape, and drop in any mailbox.PLEASE FILL OUT OWNER WARRANTY R

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

SAFETYSE4 05/05 Safety Section 1-8© 2005 Alamo Group Inc.SAFETYIn case of mechincal difficulty during operation, place the transmission in the park p

SAFETYSE4 05/05 Safety Section 1-9© 2005 Alamo Group Inc.SAFETYMany varied objects, such as wire, cable, rope, or chains, can become entangled in the

SAFETYSE4 05/05 Safety Section 1-10© 2005 Alamo Group Inc.SAFETYDo not operator or pull the mower into standing water. When uplift or fan type mower

SAFETYSE4 05/05 Safety Section 1-11© 2005 Alamo Group Inc.SAFETYConnecting or Disconnecting Implement Safety Instructions and Prac-ticesDo not turn s

SAFETYSE4 05/05 Safety Section 1-12© 2005 Alamo Group Inc.SAFETYTransporting Safety Instructions and PracticesBe particularly careful when transporti

SAFETYSE4 05/05 Safety Section 1-13© 2005 Alamo Group Inc.SAFETYTransport only at safe speeds. Serious accidents and injuries can result fromoperat

To the Owner/Operator/DealerAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator w

SAFETYSE4 05/05 Safety Section 1-14© 2005 Alamo Group Inc.SAFETYMaintenance and Service Safety Instructions and PracticesYour driving vision may be r

SAFETYSE4 05/05 Safety Section 1-15© 2005 Alamo Group Inc.SAFETYNever attempt to lubricate, adjust, or remove material from the Implement while it is

SAFETYSE4 05/05 Safety Section 1-16© 2005 Alamo Group Inc.SAFETYStorage and Parking Safety Instructions and PracticesConcluding Safety Instructions a

SAFETYSE4 05/05 Safety Section 1-17© 2005 Alamo Group Inc.SAFETYDecal LocationITEM PART NO. QTY TYPE DESCRIPTION1. 00725746 1 DANGER Peligro-Spanis

SAFETYSE4 05/05 Safety Section 1-18© 2005 Alamo Group Inc.SAFETYDecal DescriptionPeligro Translation, If you do not know how to readEnglish, please f

SAFETYSE4 05/05 Safety Section 1-19© 2005 Alamo Group Inc.SAFETYDANGER! Rotating Driveline Keep Away, Contactcan cause death.P/N 00756005DANGER! Make

SAFETYSE4 05/05 Safety Section 1-20© 2005 Alamo Group Inc.SAFETYFor safety and to guarantee optimum productreliability always use genuine RHINO repla

SAFETYSE4 05/05 Safety Section 1-21© 2005 Alamo Group Inc.SAFETYSE4 LogoP/N 0911000010Logo Product Name: RhinoP/N D302P/N D303Logo Product Name: Rhin

SAFETYSE4 05/05 Safety Section 1-22© 2005 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad terms the co

In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, incooperation with other industry manufacturers has de

Alamo Group Ag. Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vide

©2005 Alamo Group Inc.Table of ContentsSAFETY SECTION ...

©2005 Alamo Group Inc.Cutting Component Inspection ...

Safety Section 1-1© 2005 Alamo Group Inc.SAFETY SECTION

Introduction Section 2-1© 2005 Alamo Group Inc.INTRODUCTION SECTION

INTRODUCTIONSE4 05/05 Introduction Section 2-2© 2005 Alamo Group Inc.INTRODUCTIONThis Rotary Cutter is designed with care and built with quality mate

INTRODUCTIONSE4 05/05 Introduction Section 2-3© 2005 Alamo Group Inc.INTRODUCTIONYour RHINO SE4 & 42 mower is designed for light-duty cutting su

INTRODUCTIONSE4 05/05 Introduction Section 2-4© 2005 Alamo Group Inc.INTRODUCTIONAttention Owner/OperatorBEFORE OPERATING THIS MACHINE:1. Carefully

Assembly Section 3-1© 2005 Alamo Group Inc.ASSEMBLY SECTION

ASSEMBLYSE4 05/05 Assembly Section 3-2© 2005 Alamo Group Inc.ASSEMBLYDEALER SETUP INSTRUCTIONSSet up mower as received from factory with these instru

ASSEMBLYSE4 05/05 Assembly Section 3-3© 2005 Alamo Group Inc.ASSEMBLYA-FRAME INSTALLATION (FIGURE AsmP-R-0017)1. Attach “A” Frames (1) to inside of w

SAFETYSE4 05/05 Safety Section 1-2© 2005 Alamo Group Inc.SAFETYGeneral Safety Instructions and PracticesA safe and careful operator is the best opera

ASSEMBLYSE4 05/05 Assembly Section 3-4© 2005 Alamo Group Inc.ASSEMBLYHYDRAULIC RELIEF ASSEMBLY (P/N 3570) FIGURE 6Hydraulic Relief Assembly (3570), a

Operation Section 4-1© 2005 Alamo Group Inc.OPERATION SECTION

OPERATIONSE4 05/05 Operation Section 4-2© 2005 Alamo Group Inc.OPERATIONRHINO SE4 ROTARY MOWEROPERATION INSTRUCTIONSRhino SE4 rotary mowers are manuf

OPERATIONSE4 05/05 Operation Section 4-3© 2005 Alamo Group Inc.OPERATIONStandard Equipment and SpecificationsSE4 Horsepower Required (Min.) 15 HP Cut

OPERATIONSE4 05/05 Operation Section 4-4© 2005 Alamo Group Inc.OPERATION1. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibility of a

OPERATIONSE4 05/05 Operation Section 4-5© 2005 Alamo Group Inc.OPERATION2. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have the po

OPERATIONSE4 05/05 Operation Section 4-6© 2005 Alamo Group Inc.OPERATION2.3 Tractor HorsepowerThe horsepower required to operate the mower depends on

OPERATIONSE4 05/05 Operation Section 4-7© 2005 Alamo Group Inc.OPERATION2.6 Power Take Off (PTO)Depending on the unit, the mower is designed to opera

OPERATIONSE4 05/05 Operation Section 4-8© 2005 Alamo Group Inc.OPERATION3.1 Boarding the TractorUse both hands and equipped handrails and steps for s

OPERATIONSE4 05/05 Operation Section 4-9© 2005 Alamo Group Inc.OPERATION4. STARTING THE TRACTORThe operator must have a complete understanding of the

SAFETYSE4 05/05 Safety Section 1-3© 2005 Alamo Group Inc.SAFETYOperator Safety Instuctions and PracticesEngine Exhaust, some of its constituents, and

OPERATIONSE4 05/05 Operation Section 4-10© 2005 Alamo Group Inc.OPERATION1. Make sure the tractor is equipped with thecorrect PTO shaft. Change sha

OPERATIONSE4 05/05 Operation Section 4-11© 2005 Alamo Group Inc.OPERATION6.1 Setting Mower Height1. Park the tractor and mower on level ground. 2. Us

OPERATIONSE4 05/05 Operation Section 4-12© 2005 Alamo Group Inc.OPERATION6.2 Setting Deck Pitch To facilitate safe and efficient operation, the mower

OPERATIONSE4 05/05 Operation Section 4-13© 2005 Alamo Group Inc.OPERATION7.1 Driveline Length CheckWhen fitting the mower to the tractor, the telesco

OPERATIONSE4 05/05 Operation Section 4-14© 2005 Alamo Group Inc.OPERATIONShorten the driveline profiles as follows:• Remove the driveline from the tr

OPERATIONSE4 05/05 Operation Section 4-15© 2005 Alamo Group Inc.OPERATIONNever work under the Implement, the framework, or any lifted componentunless

OPERATIONSE4 05/05 Operation Section 4-16© 2005 Alamo Group Inc.OPERATION8.2 Mower Pre-Operation Inspection/ServiceBefore each mower use, a complete

OPERATIONSE4 05/05 Operation Section 4-17© 2005 Alamo Group Inc.OPERATIONAll Safety Shields, Guards and Safety devices including (but not limited to)

OPERATIONSE4 05/05 Operation Section 4-18© 2005 Alamo Group Inc.OPERATION• Inspect blades and blade bolts for looseness and excessive wear. Make sur

OPERATIONSE4 05/05 Operation Section 4-19© 2005 Alamo Group Inc.OPERATION9. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires the oper