Rhino-mounts BOOM ARM MOWER DB150 Manuel d'utilisateur télécharger pdf (Page 116)

OPERATION

DB150 07/11 Operation Section 4-10

OPERATION

6.1 Setting Boom Mower Height

1. Park the tractor and boom mower on level

ground.

2. Shut down the tractor and remove the key.

3. Level the boom mower from front to rear by

extending or retracting the 3-point top link.

4. Level the mower side to side by manipulating

one lower lift arm length. On most tractors, at

least one of the lift arms is designed to allow for

manipulation of its length. Shortening or

extending will allow for deck leveling from side

to side.

5. Securely block up the mower at this height.

NOTE: Install optional check chains when there is a

problem with the hydraulic 3-Point lift maintaining a

set height or when a constant pre-adjusted cut

height is required. See Check Chains in the

Assembly Section for this accessory.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 195 196

Pas de commentaire

Rhino-mounts BOOM ARM MOWER DB150 Manuel d'utilisateur Page 116