Rhino-mounts BOOM ARM MOWER DB150 Manuel d'utilisateur Page 155

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 196
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 154
MAINTENANCE
DB150 07/11 Maintenance Section 5-3
©2011 Alamo Group Inc.
MAINTENANCE
PARTS INFORMATION
LUBRICATION INFORMATION
Before operating your Implement, take the time to inspect and repair any damage to the machine or tractor.
Only a minimum of time and effort is required to maintain this machine to provide long life and trouble free
operation.
BOOM ARM:
Your Boom uses greased bushings that need lubrication, and with proper lubrication should last the lifetime of
the machine.
MOWER HEAD:
The Spindle Housing on the Mower head should be serviced daily (every eight hours of operation) to achieve
the best operation and the longest life. Fill with NLGI EP#2 Grease.
DRIVELINE:
The driveline powering the hydraulic system may have a universal joint at each end. Check you tractor and
locate the grease points on the driveline that is connected from the front engine pulley to the front mounted
pump. Grease weekly.
PARTS INFORMATION
Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives,
knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Rhino
specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit”
parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Rhino
mower parts for economy and safety.
(SPRM-1)
SEE YOUR RHINO DEALER
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use Cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)
Vue de la page 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 195 196

Commentaires sur ces manuels

Pas de commentaire