Rhino-mounts BOOM ARM MOWER DB150 Manuel d'utilisateur télécharger pdf (Page 169)

MAINTENANCE

DB150 07/11 Maintenance Section 5-17

MAINTENANCE

Cleaning Procedure for Large Areas - Automated

1. Clean the surface using a high-pressure water cleaner (max. 10Obar or 1,450psi) and/or a steam cleaner.

We suggest that a test be made on a small area, prior to cleaning the entire sheet

2. Use of additives to the water and/or steam should be avoided.

Other Important Instructions for All Lexan Sheets:

• Never use abrasive or highly alkaline cleaner on Lexan polycarbonate materials.

• Never use aromatic or halogenated solvents like toluene, benzene, gasoline, acetone or carbon

tetrachloride on Lexan polycarbonate materials.

• Use of incompatible cleaning materials with Lexan sheet can cause structural and/or surface damage.

• Contact with harsh solvents such as methyl ethyl ketone (MEK) or hydrochloric acid can result in surface

degradation and possible crazing of Lexan sheet.

• Never scrub with brushes, steel wool or other abrasive materials.

• Never use squeegees, razor blades or other sharp instruments to remove deposits or spots.

• Do not clean Lexan polycarbonate in direct sunlight or at high temperatures as this can lead to staining.

• For all mentioned chemicals consult the manufacturer's material safety data sheet (MSDS) for proper

safety precautions.

Additional Important Considerations for Multiwall, Corrugated and Sign Sheet

• Cleaners and solvents generally recommended for use on polycarbonate are not necessarily compatible

with the UV-protected surfaces of Lexan multiwall, corrugated and sign polycarbonate materials.

• Do not use alcohols on the UV-protected surfaces of Lexan sheet.

• Never clean the Dripgard surface of Lexan multiwall and corrugated sheets

Graffiti removal from Lexan* Margard* sheet

• Use butyl cellosolve with a clean, soft cloth to remove paints, marking pen inks and lipstick. Afterwards,

wash the sheet using mild soap and lukewarm water, then rinse with clean water to remove residue and

dry with a soft cloth.

• Masking tape and adhesive tape work well for lifting off old, weathered paints.

• To remove labels stickers, the use of kerosene or petroleum ether (BP65) is generally effective. If the

solvent does not penetrate the sticker material, apply heat using a hair dryer to soften the adhesive and

promote removal. Afterwards the cleaning procedure for small areas as outlined above

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 195 196

Pas de commentaire

Rhino-mounts BOOM ARM MOWER DB150 Manuel d'utilisateur Page 169